Model #9011-0 Generac generator

  • Sheet Metal
    3 Results
  • Base And Pulley
    3 Results
  • Alternator & Panel
    3 Results
  • Gasoline Carburetor
    3 Results
  • V-twin Engine
    3 Results
  • V-twin Engine
    3 Results
  • V-twin Engine
    3 Results

Question and Answers

Q:

kenmore electric oven electric cord

A:

Here is a link for the full installation guide for that model of range (790.90113000): Installation Instructions . The image below shows the power cord requirements from page 3 of that manual. You will need to check the electrical outlet that the range will be plugged into. This will determine whether you need a 3-prong or 4-prong electric cord kit. Once you determine the type of outlet that the range will use, you can select the proper 50 amp/1 3/8" diameter cord kit. Your local Sears store should have the proper power cord.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 30, 2010
Q:

What are the possible causes of 0 compression on one of the cylinders on the engine of a lawn tractor?

A:

The cause of 0 lbs. compression on an engine is the piston is not going up and down.

The things that can cause the piston to not go up and down are:

  • Broken connecting rod.

  • Broken crankshaft on the engine.

Read More
Jimmy K -
Sears Technician
June 04, 2009
Q:

Why does the digital display stay at 0 in the miter display?

A:

I added the instructions in the image below on how to align the encoders.

Read More
Joey S -
Sears Technician
September 04, 2009