Model #875501390 CRAFTSMAN Jack Hydraulic

  • Jack
    3 Results
Find part by diagram >

Question and Answers

Q:

need a picture manual for 875501390

A:

Thank you for your question.

I can understand wanting to have the pictorial diagram for re-assembly of the pump.

I am sorry but the manufacture does not provide that information.

They recommend that you have the pump rebuilt by an authorized hydraulic jack repair station.

I am sorry that I cannot provide you with that information.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 16, 2011
Q:

is normal the piston in my craftman floor jack 3 ton brand new showme black oil, is my first use changing oil

A:

You did not state what type of oil you put back in the floor jack. I must assume you put a good grade of hydraulic jack oil. Do not use hydraulic brake fluid, alcohol, glycerine, detergent, motor oil, or dirty oil. Use of unrecommended fluid can cause damage to your jack.

The Power Unit for you model will likely need to be replaced in order to fix the leakage. The power head/hydraulic pump assembly for your model would cost $89.40 and Sears has a new 3 ton floor jack on sale for $69.99 at Sears.com . NOTE: DO NOT USE THE FLOOR JACK UNTIL THE POWER HEAD AS BEEN REPLACE. IT COULD FAIL AND CAUSE SERIOUS BODILY INJURIES OR EVEN DEATH IF IT WAS TO FAIL AND THE VEHICLE WAS TO FALL ON YOU BEFORE PLACING JACK STANDS UNDER THE VEHICLE.

Read More
Joey S -
Sears Technician
June 10, 2010
Q:

875.501390 Floor Jack Handle Will Not Rotate 875501390 Craftsman Floor jack

A:

Thank you for your question and I understand your concern.

Based on your symptom and details, I would have to suspect the bleed off valve is damaged or jammed in the open or closed position. If you're not able to get the valve to turn, then the power unit assembly part # 950139-07 for model 875.501390 will need to be replaced. If this is the case, it would likely be less expensive to purchase a new floor jack.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
May 20, 2013

Top Parts