Model #86516-JEEP JR. 4 X 4 SEARS Toy riding

  • Jeep Jr. 4 X 4
    3 Results
Find part by diagram >

Question and Answers

Q:

Sears riding tractor #917.272246. Need complete mandrel housing ...cross referenced to my tractor. my housing deminsions.( 4"h x 4"l x 4"w)

A:

According to your description, you need to order the complete mandrel which is part 174356. You can view a photograph of that part on the Sears PartsDirect website. Key that part number into the part number search field and it will provide you with the photograph of the part. The dimensions that are listed on the description do not pertain to the exact measurements of the part itself. Those dimensions are for the shipping box that it is contained in. That may be what is causing the confusion. Based on your model number, the part 174356 should be the correct replacement mandrel. I do recommend that you order this complete mandrel instead of ordering the components separately. It is less expensive when ordered as the complete assembly.

Read More
Lyle W -
Sears Technician
June 03, 2010
Q:

I am looking for the dimensions of the 4 tables on a Sears table saw L x W x H. Can you help?

A:

I am sorry to inform you we can't get the dimensions you want. The company the manufactured the saw for Sears is not producing any power tools for us and we can't get information from them. We don't have the dimensions to give you.

Read More
Jimmy K -
Sears Technician
September 08, 2008
Q:

How far below the cabinet do I need to cut the 4" X 12" wall vent for a Kenmore microwave model 721.80043?

A:

The 4" X 12" wall opening should be 1/4" down from the top of the cabinet as shown in the template in the image below. This opening should be centered as the dotted line represents the center line of the microwave. This should help you properly position the wall opening for the vent.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
June 19, 2009