Model #8505 Porter Cable sander

  • Finishing Sander
    3 Results

Question and Answers

Q:

please provide instructions on how to replace the door handle on a microwave. The plastic piece that encases the screw that attaches to the door cracked.

A:

   Thank you for your question.  Replacing a door handle on most appliances is no big deal but a microwave is not the usual appliance. Replacing the door handle is a repair that should only be completed by a service technician. Disassembling the door would involve removing the microwave shielding components. A technician will need to remove these parts, replace the handle, and then reassemble the door. A microwave radiation leakage test must be performed on the door using proper testing equipment before the microwave can be safely returned to service.  

I recommend calling a service technician to install the door handle. You can have it repaired at your home by a  Sears technician.  Here is a link for the website: Sears Home Services 

  Thank you for using Manage my life.  Mark T.

Read More
Mark T -
Sears Technician
March 10, 2013
Q:

Microwave installation

A:

Here is a direct link for the installation guide for that microwave: Installation Instructions .

Page 14 shows how to position the fan so that the air exhausts vertically through the rear vent. Make sure that the exhaust fan is properly positioned. NOTE: Be sure that you unplug the microwave before accessing the fan motor.

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 07, 2011