Model #8-40-2ALS8 STATE STOVE Water heater

  • Functional Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

What amp breaker do I use for the WW30110 single wall oven?

A:

This model oven requires a 50 amp breaker on a single circuit. The installation instructions suggest #8 wire size being supplied to the product.

Read More
Joey S -
Sears Technician
March 09, 2009
Q:

919.165010 Air Compressor not going over 40

A:

Thank you for your response.

  • I will be looking for your results. I hope it will solve your problem.

Read More
Sam A -
Sears Technician
August 18, 2010
Q:

my 40" snowblower attachment

A:

Thank you for your question.

I am sorry you are having a problem with the belt on the snow blower. I have looked up a 40-inch snow blower attachment and see that there is a 52-inch belt used on some models. Without a model number, I am not sure if yours takes the 52-inch belt instead of the 55-inch belt. If yours should take the 52 inch, that would explain the belt slipping. If the 55-inch belt is correct and it is tight, I would suspect the snow blower is being fed to fast. Try to slow down the drive speed and see if it cures the problem. Please reply with the model numbers and more details if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 07, 2011
A:

Thank you for the reply. You are right this model only has one belt for the drive. If the bearings are free and the snow blower still stops, I recommend checking the pulleys. If the belts have been slipping, the belts become glazed and will slip easily. You can try to remove the glaze with emery cloth. This will allow the belt to grip harder. Please only do this if everything else is free. Please let me know what you find so that I can past the information on.

Read More
Mark T -
Sears Technician
February 08, 2011
See more answers