Model #831246551 PROFORM Treadmill

  • Walking Belt/frame
    3 Results
  • Hood/motor/lift Frame
    3 Results
  • Uprights/incline Motor
    3 Results
  • Console
    3 Results
Find part by diagram >

Question and Answers


I own a Proform XP Model 831246551


I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
November 21, 2011

When nothing works, does the console at least come on and show anything? If not, then I'd say the controller is certainly shot. If the console does come on you may be able to correct the situation.

If you remove the motor hood you will see the controller board and motors. Unplug the treadmill and vacuum out the motor area if there is a bit of dust present. There should be a tech sheet under the motor hood or in the motor area. On the tech sheet you will see the calibration procedure. You want to do the procedure to speed and incline (usually step 2). After you do that then see if the machine operates as it should. If it does not then you will need to replace the controller board.

The controller is part number 247217 and may be ordered HERE .

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 22, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show