Model #79571032010 Kenmore Elite bottom-mount refrigerator

  • Water And Tube Parts
    3 Results
  • Case Parts
    3 Results
  • Freezer Parts
    3 Results
  • Refrigerator Parts
    3 Results
  • Door Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Ice Maker And Ice Bin Parts
    3 Results

Question and Answers

Q:

Kenmore bottom out refridg. model # 79571032010

A:

Yes. If that water filter is clogged, then the ice maker will not get water and it will not be able to continue making ice.

Once you replace the filter (or install the filter bypass plug if you don't want to use the filter) then the ice maker should resume production. If you still have problems after replacing that filter or installing the bypass plug, reply to this thread with additional details and we will assist you further.

If you get to the point where you need to have a service technician examine and repair the ice maker, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 17, 2013
Q:

looking for clearance needed on two refrigerators

A:

The information on dimensions for the model 795.71032010 is shown in the first image below. That image also shows advice on measuring the cabinet space for the refrigerator. That model requires 2" of clearance behind the refrigerator but does not specify side and top clearance. You will normally want to allow 1" of clearance on the top and each side.

The second image shows the dimensions and clearance requirements for the model 795.71302010.

Less room on the top and sides of model 795.71032010 will probably not cause any problems. That refrigerator should have the clearance at the back. Not maintaining proper clearance according to installation guidelines can cause cooling problems and premature failure of the compressor. The clearance is needed for proper air circulation. Keep in mind that you may eventually want to replace the refrigerator and you may need extra clearance for a new model.

I hope that this is the information that you are looking for. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
July 04, 2011