Model #7909912340A Kenmore Elite free standing, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results

Question and Answers

Q:

Kenmore Elite Electric 7909912340A free standing manual

A:

Priscilla V. posted a link for your manual in the above response. Here is another link for the manual that may be easier to open and print: Owner's Manual Kenmore Elite Electric Range Model 790.9912340A . If you need more help, let us know.

Read More
Lyle W -
Sears Technician
May 01, 2012
Q:

Is there a highlimit control between the oven control board and sensor probe on a kenmore elite range model 790991234a and how can I get a wiring dia 7909912340A Kenmore Elite Electric range

A:

The resistance reading of 1091 ohms that you measured through the wire harness for the sensor probe is normal and correct. There is not a high limit thermostat in that sensor circuit. I recommend that you unplug the range and check the wire harness between the sensor probe and the electronic control board. Look for damage to the wire insulation in that harness. If you find no problems with the wire harness, then the electronic control board (part 316418750) will probably need to be replaced. Here is a repair guide that shows how to replace the electronic oven control board on a similar model of range: How to Replace an Electronic Oven Control Board. Your range will be slightly different than the one shown in that repair guide but the repair procedure is essentially the same.

If you need more help, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
April 11, 2014

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show