Model #79097472802 KENMORE ELITE free standing, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results

Question and Answers

Q:

replacing control on range.

A:

Thank you for your question and I understand your concern.

The control board my come with additional instructions. Removing and replacing the electronic oven control is pretty basic. It's a matter of disconnecting one wire at time and re-connecting it onto the new control board on the same terminal. Do not pull all the wires off at one time or you will not know where to reconnect it on the new control. To access the control board you will need to remove the screws securing the panel on the back of the control panel. NOTE: Disconnect the power cord from the power source before removing the panel. Once you have the panel off, you will see 2 or 4 screws securing the control to the mounting bracket. Remove the screws and the oven control is ready to remove.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
September 21, 2011

Top Parts