Model #79096324403 Kenmore free standing, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers

Q:

F10 error code on Kenmore electric range

A:

Thank you for your question and I understand your concern.

The "F10" fault could be caused by a faulty electronic oven control/clock assembly or a faulty oven temperature sensor probe. The oven sensor probe is located inside the oven cavity in the right or left upper rear corner. It can be taken out and disconnected and tested with an Ohm meter. At room temperature it should measure approximately 1100 Ohm of resistance. If it does, the electronic oven control/clock assembly will likely need to be replaced if all the connections are Okay. NOTE: Disconnect the power cord from the power source before removing the panel from behind the console if you need to replace the electronic oven control/clock assembly.

There is also a clock overlay that will need to be ordered and replaced. The electronic oven control is part #316557238, the clock overlay is part #316419308 and the oven temperature sensor is part #316490001. The part can be ordered from Sears PartsDirect .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
December 17, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show