Model #79096224406 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Simmer Select Board 79096224406 Kenmore Electric range


Thank you for choosing SearsPartsDirect. I can certainly understand how frustrating it can be when your range simmer select stops working. I did look into the model number you have provided and I have found the simmer select board. 

Click here for the board.

The board is located behind the back panel of the range.  

You can also visit for parts, diagrams, and repair information.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.  

Read More
Natasha12 -
Sears Technician
July 07, 2014

The switches on my Kenmore stove are installed incorrectly.


An expert shall have an answer to your question shortly. Usually an expert will respond to a question within 24 to 48 hours. Have a nice day.

Read More
Alina F. -
April 09, 2011

Thank you for your question.

I can understand the confusion of which switches should operate which burners.

According to the diagram I pulled up looking from the back of the range forward the far right switch has orange wire from the burner left front burner going to the H2 terminal on the switch. The other orange wire from the same burner goes to the 1A burner sensor then comes out on 2A and goes to H1 on the switch. L2 on the switch goes to the simmer select switch orange with a white tracer. L2 Red with a black tracer goes to P3 on the simmer select board. P on the switches is purple to all the burner indicator lights.

I would trace all the wires to make sure they are going to the correct switches.

This sounds like it will take awhile so if you can blow up the images I sent, it should help you trace the wires for the burners.

I would start with the left front burner switch and work you way across through all the surfaces switches.

The left front burner switch should be 316049800.

LR burner switch is 316436000. RR burner switch is 316436000. RF burner switch is 316238200 Dual burner switch.

Warmer burner switch is 316095503.

If you need more help please reply and I will be happy to help you further.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 11, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show