Model #79096119405 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


We are getting a F10 error when using the oven can tell me what it means 79096119405 Kenmore Electric range


Thank you for contacting with your question about the F10 error code on your Kenmore Electric Range. I will be happy to identify the code for you.
The F10 Fault code means the likely failure condition/cause is runaway temperature. Check the Oven Temperature Probe and replace it if necessary. If the oven is overheating, disconnect power to the oven. If the oven continues to overheat after the power is restored, you will need to replace the Electronic Oven Control (EOC). Severe overheating may cause extensive damage and may require the oven be replaced. Therefore, it is a good idea to disconnect the power supply when the oven is not in use until the problem is corrected. I have included blue links for the sensor probe and the EOC in case you need to replace one of them.
I have also included blue links to our Range Repair Guides that will give you tips on replacing these parts. 
If you would prefer to have a technician diagnose and repair the range for you, you can set up service at or by calling 1-800-469-4663.
I hope this answers your questions. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
April 26, 2014

we powered off the oven and replaced the EOC, but still get an error message and only broiler elements heats up. Do we need to replace lower oven heating element?

Read More
john -
October 05, 2014
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show