Model #79095324303 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Why is my oven displaying F1 & F3 error codes after baking?


Generally, the F1 display implies that the electronic oven control itself has detected an internal malfunction. The likely failure condition/cause:

  1. Shorted keypad.
  2. Control has sensed a potential runaway oven condition.
  3. Sensor probe may have gone bad.
The normal troubleshooting for this problem is to disconnect power, wait 30 seconds and reapply power. If the fault returns upon power-up, you will need to replace the electronic oven control. Since you have been doing this and the fault returns, then it is likely that you have a bad control or bad sensor probe. F3 implies the control has detected a sensor probe failure, the probe may have gone bad. I recommend calling a service technician to diagnose and repair this type of problem.

Read More
Electrical Bucket -
Sears Technician
May 02, 2008

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show