Model #79095324302 Kenmore free standing, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers

Q:

Trying to figure out how to lift Kenmore range top to replace element?

A:

Thank you for your question and I understand your concern.

I added an image below with the basic procedure. Note: Disconnect the range from the power source before servicing your range.

I do not know which surface element is needed. You can look up the part number of the one needed at Sears Parts Direct .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
June 21, 2012
Q:

What can cause kenmore electric oven control panel to stop working? (it sparked twice from the bottom and went blank)

A:

If the oven was heating at the time the oven control sparked then it could have been caused by the bake or broil element shorting out or it could have just been caused by a wire or terminal shorting to ground. Sometimes this just happens for no reason. If the oven control has shorted or just failed the oven control would cost approximately $146.49 plus the service fee of approximately $130.00 to have it replaced. I hope this information helps you decide if you want to repair or replace the range. NOTE: Disconnect the power supply from the range if you are going to remove and replace the control board yourself. The control board can be removed and replaced by removing the panel from behind the console.

Read More
Joey S -
Sears Technician
July 15, 2010

Recommended maintenance parts & accessories

Show 3 more
No more item to show