Model #79095201100 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

how do I get the oven door off, work the hinges so it comes off 79095201100 Kenmore Electric range

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about Kenmore range model 79095201100. I will be happy to help you with the instructions on how to remove the oven door. I have included the link below for you to view the owner’s manual online. The step-by-step instructions for removing and reinstalling the oven door are on page 18.

You can also see several videos online by searching “how to remove an oven door”. 

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
January 27, 2015
Q:

Element replacement cook top

A:

Thank You for contacting ManageMyLife.com

I understand how important instructions are to complete this repair. I have found a great video to help you with this Do-It-Yourself project. The model in the video is slightly different that yours but still the same concept. Remember to always unplug your appliance before working on it. Just click on the blue link below to be taken to the page.

Video- How to replace a Radiant Element

If you need further assistance please let me know. Thanks for visiting ManageMyLife.com

Read More
Desirea -
Sears Technician
October 25, 2013
Q:

Why won't my bake element go off after I turned the oven off?

A:

That type of failure could be caused by a bad relay on the control board. In some situations, it can be caused by a broken element that is shorting out to the metal cabinet.

Read More
Lyle W -
Sears Technician
September 17, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show