Model #79092854302 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Kenmore oven


The image below shows the technical information for that F1 failure code on your model of range. I recommend that you check that oven temperature sensor probe circuit. You can check the sensor probe first. Here is a link for a brief repair video that shows how to access that sensor: Oven Sensor Replacement . Unplug the range before accessing internal components.

Here is a video that shows how to check that sensor using a volt/ohm meter: Oven Sensor Testing . That sensor should measure around 1086 ohms at room temperature. If the sensor is bad, it will need to be replaced. You can order parts from the Sears PartsDirect website.

If the sensor is okay, you can plug that sensor back in and check the resistance through the entire sensor circuit from the clock control board in the console. Here is a video that shows how to access that control board in the console: Range Clock Control Replacement . Be sure that the range is still unplugged when accessing that control board. You do not have to remove that control board yet. Just check the resistance through that sensor circuit. If the resistance through that sensor circuit is okay (around 1086 ohms at room temperature) then the clock control board will need to be replaced. You may need to order the overlay as well unless you can reuse the original one as shown in that repair video.

These tips may help you fix this F1 problem on your own. If you need more assistance, reply with additional details.

If you get to a point where you need to have a service technician repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 12, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show