Model #79092313302 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


how to install replacement universal infinate switch kit to kenmore stove model 790.92313302


This is a good site to get step by step instructions. The expert will review and respond within two days, if not sooner. If you would like to schedule a technician, you can use the Sears Home Services scheduler below. I also added the Sears Parts Direct link for any needed parts.

Read More
Barbara -
November 10, 2012

Thank you for your question and I understand your concern.

I added the wiring schematic in the image below. It shows where the wires will connect for the specific burner switch. NOTE: Disconnect the power cord from the power source before removing the panel from behind the control panel. You will also need to pull the burner switch knob off and then remove the two screws securing the burner switch to the control panel.

Pull one wire off at time from the old switch and reconnect the wire to the matching terminal on the new switch. Follow the wiring diagram if needed.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
November 12, 2012
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show