Model #79091069604 Kenmore free standing, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results

Question and Answers

Q:

oven is not working? 79091069604 Kenmore Electric range

A:

Thank you for your question and I understand your concern.

If the bake and broil elements will not heat, I suspect a faulty electronic oven control/clock assembly.

The ERC (electronic oven control) is part # 316455420 for Kenmore range model 790.91069604 which can be looked up and ordered at Searspartsdirect.com. 

There is also a clock/oven control overlay that may need to be ordered. The clock overlay will need to be peeled off the old clock and re-installed on the new clock before installing the new clock/oven control. If it does not stick well, I recommend ordering and replacing the overlay at the same time.

The oven control/clock assembly can be accessed and replaced from the rear of the range. The cover behind the control panel will need to be removed. The oven control is secured with a screw in each 4 corners. NOTE: Disconnect the power cord from the power source before removing the cover from behind the control panel and replacing the control. 

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
July 01, 2013

Recommended maintenance parts & accessories

Show 3 more
No more item to show