Model #79090922400 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


First of all, what is a RTD Sensor Probe? 2nd of all, how do you test a sensor probe for an oven with a Ohms meter. Can you give me the steps it takes to


Being concerned about your appliance is very understandable. While you are waiting on a response from an expert, I was searching in the Manage My Life website and some great links that can assist you. I have provided the links below. Hope this helps!

Read More
Dezeray S -
February 02, 2011

Thank you for your question and I understand your concern. The plus and minus sign means that the room temperature can be 75 degrees plus or minus 2.5 degrees and the resistance should be 1091 ohms plus or minus 5.3 ohms.

I added a video from YouTube showing how to test the oven temperature sensor/RTD sensor probe. The oven sensor probe is located inside the oven cavity in the upper left rear or upper right rear corner. Some of the RTD sensor probes/oven temperature sensor probe can be removed from inside the oven cavity and some will have to be removed from the rear of the range. NOTE: Disconnect the power cord from the power source before servicing the range.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 03, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show