Model #79090102204 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


f1 error code on kenmore model:790.90102204 electric range


Error codes can be an inconvenience and keep your range from working properly. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
January 30, 2013

Thank you for submitting your question. The F1 fault code means the control has sensed a potential runaway oven condition. The control board (318185832) likely has a shorted relay or the oven temperature sensor probe (316217002) has failed. I recommend testing the sensor probe for the proper amount of resistance and compared to this RTD scale . The oven temperature sensor probe is located inside the oven cavity protruding from the back wall in the upper right or left corner. It can be removed and tested with an ohms/volt meter. If it tests good, according to the RTD scale then the oven control will need to be replaced. You can order parts from our Sears Parts Direct web site. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
January 31, 2013
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show