Model #79078511400 Kenmore free standing, gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers

Q:

where can I find the instructions to replkace the temp control on a kenmore 79078511400 free standing gas range/oven. I was told by sears parts that it is here

A:

Thank you for your question and I understand your concern.

I'm not clear in understanding which part you need to replace but I will assume you need to replace the electronic oven control (EOC) board/clock assembly.

Removing and replacing the electronic oven control is a fairly simple procedure.

The electronic oven control can be accessed and replace from the rear of the range. Disconnect the power cord from the power source and then remove the screws securing the panel from behind the console. Remove the panel. The electronic oven control board will be fastened by a screw in each corner of the control. Disconnect one wire at time from the old control and re-connect the wire to same terminal on the new control. Reverse the procedure to install the new control.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 16, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show