Model #79075727991 KENMORE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Burners work, oven does not.


Thank you for choosing I understand how frustrating it can be when the oven can't be used. Are both the broil and bake not working inside the oven? If only one of these isn't working, you may have to replace the ignitor or burner. If one works, try swapping the ignitor as they are interchangable. Once swapped, if it works, the ignitor will need to be replaced. Also, you can test your ignitor if you have an ohm meter and are comfortable with using it. If both the broil and bake went out at the same time, it may be a problem with the control board or valve. Make sure your valve is open all the way. If the ignitor glows but doesn't light, it is most likely the valve that has malfunctioned.
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
I can appreciate wanting to diagnose and repair the oven yourself. However I strongly recommend against it as working with gas is inherently dangerous. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using

Read More
Lokelani -
Sears Technician
August 25, 2013

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show