Model #79071053400 Kenmore free standing, gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers

Q:

Why won't the replacement regulator fit on my Kenmore range model 79071053400?

A:

I recommend calling a service technician to install this part. If this gas regulator is not installed properly, it can be extremely dangerous. The fittings must be properly torqued and leak checked.

I verified that the substituted part is the correct number. See if the regulator has a part number stamped directly on it to verify that you physically have the correct part. Here is a link from Appliance Parts Specialists that has an image of the regulator 5304416583: Part 5304416583 Image . If your part matches this image, then it should be the one that you need.

You did not indicate why you are replacing the regulator. This regulator controls both the cook top burners and the oven burner. An indication that this part has failed would be an inadequate gas pressure supplied to both areas. If you are certain that the regulator needs to be replaced, I recommend calling a service technician to replace the part. If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
February 13, 2009
A:

Thanks for the feedback. We are glad to hear that you got this problem resolved. Call on us again any time that you need more help.

Read More
Lyle W -
Sears Technician
March 29, 2012
See more answers

Top Parts