Model #79070502013 Kenmore free standing, gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results

Question and Answers

Q:

installing glass front onto Kenmore oven door 79070502013

A:

Thank you for your question and I understand your concern.

The small felt strips will attach the back side of the front door glass. Center each strip on each side near the outer edge of the glass. Place one strip on each side of the glass in a vertical position then reassemble the door.

I hope this helpful.

Read More
Joey S -
Sears Technician
April 30, 2014
Q:

sears model 79070502013 the oven flame is to high, moving the air shutter dose not work.. I converted the range to L.P.

A:

That conversion should be completed by a qualified installer.

The pressure regulator should have been converted to LP gas. The instructions for the LP kit probably were similar to the ones shown in the first image below. If you did not convert that pressure regulator, then you could experience the high flames in the oven.

If the regulator was properly converted, then you may have not tightened down the orifice spud on that oven burner properly. That orifice spud is sometimes difficult to tighten down. It can sometimes get stuck before it is tightened down to the LP position. I recommend that you have the installer carefully try to tighten that orifice spud as shown in the second image.

These tips should help you solve this LP conversion problem. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
October 31, 2011

Top Parts