Model #79061752105 Kenmore free standing, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers


I have a Kenmore range model no 79061752105 running 25 degrees to cold. How do i calibrate the oven


The calibration of the ES100 oven control board cannot be adjusted. The oven temperature sensor probe resistance will need to measured and compared to the RTD scale in the image below. The oven sensor probe can be disconnected and tested from behind the range. It will have a quick disconnect plug that will need to be disconnected before measuring the resistance of the oven temperature sensor. If the temperature measures according to the RTD scale then the oven control board will need to be replaced. If the sensor does not measure according to the RTD scale, replace the sensor. NOTE: Disconnect the power supply from the range before removing the rear panel and testing the oven sensor.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
June 18, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show