Model #79046822102 KENMORE ELITE slide-in range, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers


need a wiring schimatic for kenmore stovetop 790-46822102 the partkit is dual infinite switch kit #903097-9020


I provided wiring information for this dual infinite switch kit in the image below.

Be sure that you shut off the circuit breaker for the range before accessing internal components.

To wire the switch, you will need to connect the purple wire that was connected to the S2 terminal on the original switch to the terminal #4 on the new switch. The wire that was on the #4 of the original switch will be attached to the #4 terminal of the new switch along with the purple wire from the S2 connection of the original switch. A "Y" connector is used to make this connection. The wire that was connected to the S1 terminal on the original switch should be capped off with a ceramic wire nut so that it won't short to the metal cabinet. The other wires should be connected to the same terminals on the new switch as they were on the original switch.

This information should help you properly connect the new infinite switch.

If you need more help, reply with additional details and we will assist you further.

NOTE: It is extremely important that you properly connect the wires on the new switch. Failure to properly wire the new switch can result in damage to the range and serious injury. If you are not certain that you can properly connect the new switch, I recommend that you have service technician complete this repair. Here is a link for the Sears Service website in case you need it: Sears Home Services .

Read More
Lyle W -
Sears Technician
November 12, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show