Model #79046814992 KENMORE ELITE Slide-In Range, Electric/Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring
    3 Results
Find part by diagram >

Question and Answers


I have sent in the correct model number and part I needed info on to install. Can you help me?


Thanks for sending the information. Replacing the clock or control is somewhat of a job. Here are the instructions.

  • Disconnect the power to the range and slide it forward until the side panels clear the cabinets.

  • Remove the screws in both side panels and remove the side panels.

  • With the side panels removed you can access the mounting screws that hold the control panel in place, remove them.

  • The control panel will roll forward and you can access the mounting screws and wiring on the control.

  • Before you start open the oven door and look above the door opening for any screws that go up. If there are any there remove them. My instructions weren't clear regarding any screws above the door, sometimes there are some.

Read More
Jimmy K -
Sears Technician
September 11, 2008

Top Parts