Model #79046612500 Kenmore Elite slide-in range, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers

Q:

Range model 79046612500 handle came of on one side

A:

Thank you for your question on the replacement of the door handle on the range.

Open the oven door and locate the two hinge locks and push them down and lift up and out to remove the door.

Lay the door with inside up on a flat surface with the door handle hanging over the edge.

Carefully loosen but do NOT remove the screws on the upper inside corner of the oven door liner.

Being careful not to move the door around because on the inside of the door are two tube spacers that the screws go through to get through the different layers of the door and connect to the door handle.

To install the handle line the screw holes of the new handle with the screws that will be sticking out of the liner and tighten the screws.

Re-install the door onto the oven chassis and release the locks and close the door.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
November 30, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show