Model #79046582501 Kenmore slide-in range, electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Soor
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers

Q:

How do I remove a part of my stove to insert the overlay over the touchpad? It is a slide in electric range. This is on the front panel.

A:

To access the overlay on your control, begin by disconnecting the power to the range.

Remove the top burner knobs and remove the 4 nuts on the shafts of the burner switches.

The control panel will lift off the range. There is a gasket underneath the control panel that might stick it to the range. Use a putty knife to release the gasket as you lift if necessary.

Remove the screws that hold the control to the control panel from the rear and remove the control.

The overlay peels off the control and the new one sticks on. The overlay has a sticky back.

Read More
Jimmy K -
Sears Technician
October 09, 2008