Model #79046574400 KENMORE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Why is the surface burner on my Kenmore model 790.46574400 cook top either on high or off with no in between?


You're correct in your assumption the surface control switch will have to be change if the surface element is not being controlled.

The part number for the surface switch depends upon if it controls the large or small element. The switch for the large element is part number 318220081 and the part number for the switch for the small element is 903136-9010.

Both are available from the following link: Sears PartsDirect .

The instructions to access and remove the surface control switches are in the image below. Remember to unplug or turn off the power to the range before servicing.

We you get to the switch and think about removing the wires I suggest you take a moment and mark the terminals and colors before removing all the wires.

I hope this information is helpful resolving your problem but if you have any additional questions then submit another question with additional details for further assistance.

Read More
Fred M -
Sears Technician
April 03, 2009

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show