Model #79041399402 KENMORE built-in oven, electric

  • Control Panel
    3 Results
  • Upper Oven
    3 Results
  • Lower Oven
    3 Results
  • Doors
    3 Results
  • Wiring Diagram
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

my oven model 79041399402

A:

I assume that you removed that door from the oven before beginning that repair. If not, then you can use the procedure shown in the first image below to carefully remove that oven door from the lower oven. NOTE: That oven door is heavy. Two people may be needed to safely lift that door off of the oven.

The second image shows the parts diagram for the lower oven door. You may be to use that information to help you replace that door. You should have removed the screws (Key 10) from the handle first. I cannot tell from the parts drawing whether you need to remove or loosen more screws in order to remove that outer glass. You may need to completely disassemble that oven door to get that glass unjammed. I hope that this information helps. If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician complete this repair, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 20, 2012
Q:

oven #79041399402/glass#318051556

A:

We tried to provide you with some help for this problem in an answer to your previous question. Here is a link for that previous answer: my oven model 79041399402 . You may be able to remove that door from the range as shown in that answer. We don't have a display model for that range so it is difficult to see how that outer door glass is housed in that oven door. It appears that you need to remove that oven door handle and then you can move that door glass. I hope that this information helps. If you need more assistance, I recommend that you send us a digital photograph of the door so that we can see what you are facing.

Read More
Lyle W -
Sears Technician
February 22, 2012
A:

If the door is still installed on the oven, then that could be contributing to your out-of-square condition. Removing the door from the oven and placing it on a flat, padded surface may help you get the frame back into square so that you can remove that glass. If the glass is already on a flat, padded surface, then you may be able to loosen or remove more fasteners (screws) or components on the door to loosen up that frame. You may be able to get some leverage on the glass by using a padded crow bar or large screw driver to pry the glass back out depending on where it is stuck. A digital picture may help us see the predicament that you are in. I hope that some of these tips help. Thanks for sending us more information. Reply with additional details if you need more assistance.

Read More
Lyle W -
Sears Technician
February 24, 2012
See more answers
Q:

oven #79041399402/glass#318051556

A:

Thank you for your question and I understand your concern.

The frame will become some what flimsy or become a little out of square when it is not assembled and secured. If you are not able to square it up, then it may need to be replaced.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

If it gets to the point you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 27, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show