Model #72-7657-23-07 Tappan range (gas)

  • Cover Page
    3 Results
  • Splasher Control
    3 Results
  • Cooktop Parts
    3 Results
  • Lower Oven Door Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Control Panel
    3 Results
  • Upper Oven Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Lower Body Parts
    3 Results
  • Upper Body Parts
    3 Results

Question and Answers

Q:

Kenmore Electric dryer model 11062884101 heating element not working have replaced part #3403585 on 3/23/07. Repairman said it is unusual to have to replac

A:

Hi Charles,

Thank you for submitting a question to Manage My Life.

The first link above is to one of my answers on this type of dryer. Follow my troubleshooting in this link; What can cause my electric dryer to not heat after replacing the heating element? it will guide you through the first things you will need to check.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post with details of what you find.

Landell

Read More
Landell -
Sears Technician
April 24, 2012
Q:

Dyson DC 07 vacuum

A:

Thank you for your request for the handle release.

There has been an update to this part from Dyson

You will need to order either 908821-01 if a clutched drive assembly or 908822-01 for a clutch less model.

You can order this part from: Sears Parts Direct .

Lock .

I hope this will help.

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
August 18, 2011
Q:

Thermador PD304BS/07 won't bake above 350

A:

Thank you for your question and I understand your concern.

The first thing to check and confirm is to make sure the bake and broil elements operate. If the bake and broil elements will heat, then it could have a faulty temperature sensor or an intermittent oven control board operation.

I strongly suggest calling a service technician to diagnose and repair your range. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
September 04, 2012