Model #72-3651-00 TAPPAN Free Standing, Electric

  • Gas Range
    3 Results
  • Gas Range Page 2
    3 Results
  • Gas Range Page 3
    3 Results
  • Gas Range Page 4
    3 Results
  • Gas Range Page 5
    3 Results
  • Gas Range Page 6
    3 Results
  • Gas Range Page 7
    3 Results
  • Gas Range Page 8
    3 Results
  • Gas Range Page 9
    3 Results
  • Gas Range Page 10
    3 Results
  • Gas Range Page 11
    3 Results
  • Gas Range Page 12
    3 Results
  • Gas Range Page 13
    3 Results
  • Functional Parts List
    3 Results
Find part by diagram >

Question and Answers

Q:

Why does the temperature control rise to 72 degrees in the timer mode on my window air conditioner?

A:

I referred to the technical information for this window air conditioner. It does not give me specific information on the operation of the temperature display or the timer mode.

I am not able to determine whether the temperature setting or the actual temperature is being displayed. If the actual temperature is being displayed, then your air conditioner could be operating normally. Even at a setting of 69 degrees, it would not be unusual for an actual temperature of 72 degrees to be measured by the air conditioner temperature probe. A few degrees above the setting would be normal.

If only the temperature setting is being displayed, then you could be experiencing a power failure to the air conditioner that is resetting the temperature to 72 degrees. The temperature resets to 72 degrees when the unit is initially turned on. The timer setting is not normally reset when a power failure is experienced. This could explain the reason for the temperature changing to 72 degrees in the timed mode.

You could have a control board issue that is causing this problem. I do not have enough specific information on this unit to give you an exact answer.

If you suspect that the air conditioner is not operating properly, I recommend getting it checked by a service technician.

Read More
Lyle W -
Sears Technician
June 11, 2008
Q:

Can you help find accessories for Sportscraft 72 inch 4-1 swivel game table?

A:

The triangle still appears to be available as a replacement part. It is part number 9-3-32-899SS12. You can order that part from this page: Triangle Part 9-3-32-899SS12 for Sportcraft Multi-Game Table.

 

The billiard balls do not appear to be available through the Sears PartsDirect source or any other parts source that I checked. You may be able to find billiard balls at a local game supply store.

 

There are some other parts and accessories listed for that game table. Here is a direct link for parts: Sportcraft Multi-Game Table Model 1-1-36-933 Repair Parts. 

 

I hope that this information helps. If you need further assistance, reply with additional details. 

Read More
Lyle W -
Sears Technician
March 16, 2013
Q:

You did not answer my question. Go to the page and tell me which manual I use. Is it 00 or 01?

A:

I apologize for being clear. Use the manual or the 01 model.

Read More
Jimmy K -
Sears Technician
April 25, 2008