Model #72163689300 Kenmore microwave/hood combo

  • Door Parts
    3 Results
  • Controller Parts
    3 Results
  • Oven Cavity
    3 Results
  • Latch Board
    3 Results
  • Interior Parts 1
    3 Results
  • Interior Parts 2
    3 Results
  • Instalation Parts
    3 Results

Question and Answers

Q:

Why do I get the F9 error code on my Kenmore microwave?

A:

The F9 error code indicates an inverter failure. This can sometimes be caused by a power surge or glitch through the electrical lines that affected the control board. Try unplugging the microwave for 1 minute. If you continue to get the F9 error code after plugging the microwave back in, then it will need to be serviced by a technician for an internal component failure. You could have an inverter failure, a failed electronic control board or a loose wire. A technician will be needed due to the inherent dangers of servicing microwaves. Internal capacitors can retain a lethal electrical charge even when the microwave is completely unplugged. A microwave radiation leakage test must be performed on the unit following any internal component repair.

Read More
Lyle W -
Sears Technician
April 21, 2009

Top Parts