Model #72163663300 Kenmore microwave/hood combo

  • Door Parts
    3 Results
  • Control Panel 1
    3 Results
  • Control Panel 2
    3 Results
  • Oven Cavity
    3 Results
  • Latch Board
    3 Results
  • Interior Parts 1
    3 Results
  • Interior Parts 2
    3 Results
  • Instalation Parts
    3 Results

Question and Answers

Q:

kenmore micro hood combo f-9 error , model 72163663300 Magnetron?

A:

Thank you for your question. I see that you have been given a link to an F9 error code. I would like to add the following information. The F9 error code indicates an inverter failure. This can sometimes by caused by a power surge or glitch through the electrical lines. You can sometimes clear this fault by completely unplugging the microwave for 1 minute. Plug it back in and see if the fault code returns. If it does, then you have an internal component failure that will need to be serviced by a technician. Due to the inherent dangers involved in repairing microwaves it is strongly recommend that a service technician service the microwave. Internal capacitors can retain a lethal electrical charge even though the unit is completely unplugged. A microwave radiation leakage test must be performed on the unit following any internal component repair.

We will give repair instructions on any other appliance that a customer can safely handle.

You can have the microwave repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 12, 2011

Top Parts