Model #72137060700 KENMORE Vacuum, Upright

  • Handle Parts
    3 Results
  • Base Parts
    3 Results
  • Motor Assembly Parts
    3 Results
  • Base Parts
    3 Results
  • Roller Parts
    3 Results
  • Base Plate Parts
    3 Results
  • Nozzle Parts
    3 Results
  • Tank Assembly Parts
    3 Results
  • Accessories Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

How many days, weeks or years do I have to wait to get instructions on how to install a new wheel to my vacume? Why can't you just tell me!!!!!!

A:

Thank you for your question on the wheel replacement on the vacuum cleaner.

I am sorry that it has taken so long but the manual did not show how much of the unit you had to take apart to remove and replace the wheel. There have been a number of style changes and the imaging in the manual did not go into much detail even with the help from the manufacture.

I will give you the instructions from the technical manual below.

I hope this was of some help but please let me know if it was not and I will research it further.

Sam A.

Read More
Sam A -
Sears Technician
September 11, 2012
Q:

How to install vacume wheel assembly?

A:

Thank you for your question on the replacing of the wheel on the upright vacuum cleaner.

There is an E clip on the inside of the housing that you will have to remove to get the wheel off. I am not sure if you can get to the clip from underneath or not.

If you turn the unit upside down you may be able to see the clip you will need to remove in order to get the wheel off.

I will give you a picture but it does not show if you need to remove other parts to get to the clip.

Please let me know how it works out with access to the E clip.

Sam A.

Read More
Sam A -
Sears Technician
September 11, 2012

Recommended maintenance parts & accessories

Show 3 more
No more item to show