Model #70172207-83 Sears playground equipment

  • A-frame Assembly No. 109
    3 Results
  • Glideride Assembly No. 103
    3 Results
  • Lawnswing Assembly No. 103
    3 Results
  • Slide Assembly No. 105
    3 Results
  • Swing Assembly
    3 Results

Question and Answers

Q:

How To Oil 38519010200 Kenmore Elite Sewing machine

A:

The service manual does NOT mention anything about oiling this machine nor does it show any specific places to oil it. I recommend oiling any mechanical parts where friction is applied or take the machine in for service.

Read More
Joey S -
Sears Technician
June 08, 2015
Q:

This is a Craftsman lawn tractor model 917 255370. Parts direct sent belt number STD324830 which seems to be about 3 inches to long. The old belt was 79 3/4", the new one is 83". This is the recommended substitute. How do I install to fit?

A:

You can't make the belt fit if it is 3 1/4 inches longer than the original.

If you are sure you measured correctly and part of the original belt did not fall off, get parts direct to send you another belt.

Read More
Jimmy K -
Sears Technician
July 15, 2009
Q:

installed new drive belt on craftsman 15.5 hp. mod.# 917271022 tractor, it stalls when clutch is released, original belt 82 1/4" x 1/2" new belt 83" x 1/2,

A:

Thank you for your question.

I see that Jacqueline S has given you a good link to an answered question. I really do not think the belt has any thing to do with the tractor stalling when the brake is released. I recommend checking the safety switch connections. The tractor has a seat switch, brake switch and a mower deck switch. It sounds more like a seat switch issue. Check the seat switch connector. If it is not completely seated to the switch, the tractor will die when the brake is released.

If you need a copy of the manual, please click the following link.

Manual

I have also added an image of how the drive belt should be routed.

If you need further assistance, please reply with more details below.

Thank you for using Manage my life.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Mark T -
Sears Technician
September 27, 2010