Model #7000 Mca Sports cycle

  • Main Frame
    3 Results
  • Flywheel And Crank Assembly
    3 Results

Question and Answers

Q:

Why does my zero turn model 7000 mower not move forward or backward?

A:

There are 2 reservoirs for oil for the hydro transaxles on your mower. The reservoirs should be filled to the line in each reservoir. Use 10w30 motor oil to fill the reservoirs.

If the oil in the hydro's is low look for leaks. You might have a fitting cracked or some bolts that have backed out.

Read More
Jimmy K -
Sears Technician
September 19, 2008
Q:

Here is a photo of the hour meter on my ZT 7000. Is that an error message? It hasn't changed since I last mowed

A:

Your photo did not appear. I added an image below of the hour meter functions. Since your photo of the hour meter did not come through I can't be sure if the hour meter has been corrupted or not. I do know the hour meter will flash an oil change indicator at 5 hours, and a lubrication reminder every 50 hours. These reminders will automatically reset themselves. NOTE: The hour meter will register the passage of time when the key is in the RUN position, even if the engine is NOT running. The hour meter is part number 1687008 if it does not reset automatically on its own.

Read More
Joey S -
Sears Technician
June 18, 2010
Q:

ZT 7000 CRAFTSMAN TENSION SPRING BREAKS FOR DRIVE BELT AFTER BELT REPLACEMENT

A:

Without a model number I can only give you general information on the mower. The ZT7000 is a style number and can cover up to 8 models.

Replacing the drive belt is considered a job a Sears technician should do.

We don't have a routing guide for the drive belt on zero turn mowers.

I think you have the belt routed wrong and it is rubbing on something causing it to break.

I recommend you schedule service and get a Sears technician to diagnose and repair the mower.

Read More
Jimmy K -
Sears Technician
June 21, 2010