Model #6B (1863-01 - 1863-01) Briggs & Stratton engine

  • Cylinder Assembly
    3 Results
  • Flywheel Assembly
    3 Results
  • Standard Bolts
    3 Results

Question and Answers

Q:

The walking belt of my Sears Proform crosswalk 831297364 has shifted to the right.I tried 6b in the manual?

A:

Be sure you are turning the left adjustment bolt counterclockwise and the right bolt clockwise.

You should remove the screws in the back of the end cap and lift the front edge of the end cap to release it from the clips then remove the end cap. Spray the adjusting screws with some WD40 to free them up and try again. You should let the treadmill run for 4-5 minutes after each adjustment as it will move very slowly from right to left.

Read More
Jimmy K -
Sears Technician
Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008
Q:

LG Model #LDS5811ST/01

A:

Check the child lock function to make sure that function is not enabled as shown in the first image below. You did not indicate the error code that you are seeing on the dishwasher. The second and third images show the error codes for this type of dishwasher. If you see one of these error codes, you may be able to perform some of the troubleshooting shown in those images. Be sure that you shut off the circuit breaker for the dishwasher to completely disconnect electrical power before accessing internal components. If you need more help, reply with additional details (error code being displayed) and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 07, 2011