Model #69A Eureka attachments (vacuum)

  • Hood
    3 Results
  • Wiring
    3 Results

Question and Answers

Q:

Sears Paint Sprayer Model 106152540 106152540

A:

Thank you for your question.

 

I will be happy to assist you with replacing the belt on your compressor. First, unplug the unit from the wall outlet. Then remove the screws that secure the belt guard. According to the parts list it looks like there are about five screws. Once the belt guard is removed, you can roll the belt off the large pulley. The part number for the replacement belt is STD304390 and can be ordered from the following link. Replacement belt for a Craftsman paint sprayer model 106152540.  The other belts listed for other models covered under the same parts list diagram. To install the new belt just hook the belt on the small pulley first. Then roll the belt onto the large pulley. If the belt needs to be adjusted you can loosen the motor mount bolts. The holes should be slotted so you can loosen or tighten the belt. Once you have the belt at the correct tension, you can tighten the motor bolts. After you have the belt installed, the belt guard can be reinstalled. Now you are ready to check the operation.

 

I hope this is helpful. Please let me know if you need further assistance.  

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
September 23, 2013

Recommended maintenance parts & accessories

Show 3 more
No more item to show