Model #699SR-MOTORIZED TREADMILL Walton treadmill

  • Motorized Treadmill
    3 Results

Question and Answers

Q:

Changing blade on Sears motorized edger.

A:

Thank you for your question.

I will be happy to assist you. To remove the blade nut on the edger you need to turn the nut counter clockwise.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
September 19, 2012
Q:

I have a 12 in Craftsman motorized saw can run it on115 or230 if so how

A:

We don't have instructions for changing your motor over from 110 to 220.

Look on the inside of the panel that covers the junction box of the motor. Sometimes the instructions for changing the voltage are there.

Read More
Jimmy K -
Sears Technician
May 18, 2010
Q:

Why has my motorized turntable shaft burned and sheered off for the second time?

A:

I am not aware of a common problem with the turntable motor or the ring on that model of Kenmore microwave. I assume that you purchased the microwave brand new from a Sears store. Since the microwave is less than a year old, it should still be under warranty. I recommend that you return it to the Sears store and have it repaired under the warranty. If it cannot be fixed under the warranty, then it will normally be replaced.

Read More
Lyle W -
Sears Technician
December 27, 2012