Model #67-3890-PROBE VI Hedstrom toy riding

  • Roll Bar Assembly D
    3 Results
  • Diagram
    3 Results

Question and Answers

Q:

vi\deos on how to install a water inlet valve on a whirpool gold dishwasher

A:

Here is a link for a good repair video that shows how to complete that repair: Dishwasher Inlet Water Valve Replacement Video . Your dishwasher may look slightly different than the one shown in that video but the basic repair procedure is the same.

If you need more help, reply with additional details and the full model number of your Whirlpool Gold dishwasher.

If you get to the point where you need to have a service technician replace that water valve, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 05, 2012
Q:

How do I install the battery replacement in a Craftsman 6 inch cordless shrub trimmer?

A:

If you can find the model number of the trimmer, you can find it by following the instructions below. We can't find any information without the model number.

Go to the Home page of Manage My Home and hold your mouse over home, select Products and manuals from the drop down menu.

For this model enter the following:

Type of Product Hedge trimmer

Brand Craftsman

Model no. Your model number

Select Find manuals at the bottom of the page to search for your manuals. Choose the blue Owner's manual (pdf) link for your product from the search results and it will open your manual for viewing online.

You can save a copy of the manual to your Home Profile or, on most computer systems, download or print the manual while you are viewing it.

If the manual can't be found, please call the Manage My Home Member Services Team at 1-800-803-6775, between 8 a.m. and 8 p.m. Central Time. They will be more than happy to help you track down the manual.

Read More
Jimmy K -
Sears Technician
May 27, 2008
Q:

Why does the MEAT TEMP PROBE display a temperature when there is no probe installed?

A:

The instructions for the Meat Temperature Probe are shown in the image below. If the icon that indicates that the meat temperature probe is inserted is not lit, then you could have a stuck button on the control console or you could have a failed electronic control board that is causing this problem. If the icon is lit, then you could have a problem with the meat probe fitting or the wiring between the control board and the fitting. If the control is displaying the meat probe temperature inadvertently on its own without a button being pressed then you will likely need to replace the control panel assembly (part 318366204). A failed electronic oven control board (part 316443822) could also cause this problem. I recommend that you have a service technician diagnose and repair this failure. This would prevent you from replacing unnecessary parts.

You indicated that you wanted to fix this problem yourself. We may be help to help you further if we can get more details about this problem. If you want more help, resubmit your question with these additional details:

  • Whether the meat probe icon is lit on the control when the MEAT TEMP PROBE temperature is displayed.
  • Whether the meat probe temperature on the display flashes
  • Whether the meat probe temperature display is constant or intermittent
  • Whether the PnCC or P CC appears on the display
With these additional details, we may be able to offer more advice that could help you possibly repair this failure yourself.

Read More
Lyle W -
Sears Technician
October 08, 2009