Model #66592144300 KENMORE Free Standing, Electric

  • Cooktop
    3 Results
  • Door
    3 Results
  • Chassis
    3 Results
  • Control Panel
    3 Results
  • Drawer & Broiler
    3 Results
Find part by diagram >

Question and Answers


Why does both the bake and broil elements not heat?


I referred to the profile you created in the website and see that you have a Kenmore range model# 665.92144300. Using this information gives me the needed specifications of your Kenmore range.

The Thermal fuse would only keep the broiler element from heating, not the bake element. You did not mention any fault codes on the display so I'm assuming there was no fault code displayed.

There is a double line break relay on the electronic oven control board that could have failed, and it would cause both the bake and broil element not to heat. The double line break relay breaks the L2 voltage to both elements. The failure is likely to be the electronic oven control board.

I recommend calling a service technician to diagnose and repair your range.

Read More
expert -
Sears Technician
November 30, 2007

Top Parts