Model #66575814000 KENMORE Free Standing, Gas

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Door
    3 Results
  • Drawer And Broiler
    3 Results
Find part by diagram >

Question and Answers


What would keep the burners from lighting on my Kenmore range model 665.75814000?


If the display on the oven control board is blank then I recommend that you make sure that the range is properly plugged in and that the outlet is working properly. Check the breaker for the range outlet and plug a small lamp or appliance into the outlet to make sure that it is working if the breaker is okay. A complete lack of electrical power to the range would cause the symptoms that you describe if the clock display for the oven is blank.

Even though you can still light the burners, the oven has a safety valve that will not open unless the ignition system is working properly.

If the clock display is okay then you likely have a wiring failure or a failed DSI (Direct Spark Ignition) control board. This type of problem will normally need to be diagnosed and repaired by a service technician. This is a complicated ignition system. Here is a link for a previous answer that provides extensive technical information and testing of this system: Where can I find specific procedures for checking the control board functions on my Whirlpool gas range model TGS325MQ4?

If you are able to test the DSI system and determine the cause of your failure then you may be able to fix this range problem yourself. If you need parts, you can order them from the Sears PartsDirect website.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 13, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show