Model #66575012101 KENMORE free standing, gas

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Door
    3 Results
  • Drawer Amd Broiler
    3 Results

Question and Answers

Q:

Why is there no power to my Kenmore gas range model 66575012101?

A:

I assume that when you checked the outlet that you plugged a lamp or small appliance into the outlet to test it. If not, I recommend checking the outlet in this manner to make sure that it is working.

If the outlet is good, then you could have a wiring problem between the outlet and the control or you could have a failed control board. I recommend calling a service technician to diagnose and repair this type of problem.

If you have a volt/ohm meter and the technical ability to check continuity through wiring, you may be able to diagnose and repair this problem yourself. If this is the case, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
Q:

kenmore gas range #66575012101 insulation replace.

A:

Replacing the insulation in that type of range is an advanced repair. I do not recommend that you attempt that task yourself. The entire frame of the range will need to be disassembled. There is a not a written or illustrated procedure for that process. You can view the parts diagram on the Sears PartsDirect website. That will show you how the components in the range. There is a chance that you can disassemble the range and install that insulation using that information and your personal observation of the range. Be sure that you unplug the range and shut off the gas supply before attempting this repair. If you are able to disassemble the range, you can replace the insulation in the same manner that you found it installed. If you are not completely confident that you can safely complete this repair, I recommend that you have a service technician install that installation. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
November 30, 2011
Q:

My gas range will not light

A:

This range does not have a pilot. It has a direct spark ignition system. This type of system is difficult to diagnose and repair. I recommend that you have a service technician fix this type of failure. Here is a link for the Sears Service website: Sears Home Services .

If you are advanced in technical skills, you may be able to use the information in this link of a previous answer to perform some troubleshooting on this ignition system: Where can I find specific procedures for checking the control board functions on my Whirlpool gas range model TGS325MQ4?

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 15, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show