Model #66561701100 Kenmore microwave/hood combo

  • Control Panel
    3 Results
  • Door
    3 Results
  • Interior And Ventilation
    3 Results
  • Air Flow
    3 Results
  • Magnetron And Turntable
    3 Results
  • Cabinet And Installation
    3 Results

Question and Answers

Q:

Why is my Kenmore microwave hood flashing f6?

A:

The F6 error code indicates that the control board detects a microwave relay failure. The internal wiring will need to be checked. If the wiring is okay to the relay, then the control board will need to be replaced. A technician will be needed for this type of internal component repair on the microwave. Internal capacitors on the microwave can still retain a charge even when the unit is unplugged. A microwave radiation leakage test must be performed using the proper equipment following this type of repair. I recommend calling a service technician to repair this failure.

Read More
Lyle W -
Sears Technician
August 19, 2008
Q:

Why is my Kenmore microwave hood flashing f6?

A:

The F6 error code indicates that the control board detects a microwave relay failure. The internal wiring will need to be checked. If the wiring is okay to the relay, then the control board will need to be replaced. A technician will be needed for this type of internal component repair on the microwave. Internal capacitors on the microwave can still retain a charge even when the unit is unplugged. A microwave radiation leakage test must be performed using the proper equipment following this type of repair. I recommend calling a service technician to repair this failure.

Read More
Lyle W -
Sears Technician
August 19, 2008