Model #66516829000 Kenmore dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results


Error Codes

Error Code:



Question and Answers


My dishwasher kenmore 665-16829000 has stopped draining.


I definitely agree with your approach to check that knock out plug on the new garbage disposal first. That will likely help you resolve this draining problem in your dishwasher.

That seal that you are describing is probably KEY 11 shown on the parts drawing in the first image below. A photograph of that part is shown above that parts drawing. That seal should have the split that you are describing. That issue will not cause the drain problem that you are describing. I understand your concern about that split in that part but I hope that this information explains how it is normal for that part to have that split.

If you still have problems with the dishwasher draining after addressing the issue with that knock out plug in the garbage disposal, then you could have a problem with the check valve at the bottom of the sump in this dishwasher. Here is a link for a previous answer that addresses that issue for your type of dishwasher: How to check a clog in dishwasher drain pump .

I hope that this information helps. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 09, 2011

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show