Model #66516012401 Kenmore dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is the "clean" light on my dishwasher staying on and not allowing me to start a new cycle?

A:

If the clean light is blinking 7 times repeatedly, this indicates a heater circuit fault. You can reset the control using this key sequence (from standby within 5 seconds): HEATED DRY, NORMAL WASH, HEATED DRY, NORMAL WASH.

After pressing these keys, the lights on the console will all turn on and then the dishwasher will begin a short diagnostic cycle. Press the CANCEL/DRAIN button to cancel this diagnostic cycle. The dishwasher may go into a 2 minute drain. The control will then be reset. You should be able to start a new cycle.

If you have a problem with the heating element or another component failure, then this fault may return. If the fault code frequently returns, call a technician for service or resubmit a question with additional details for more help with this problem.

Read More
Lyle W -
Sears Technician
May 29, 2008

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show