Model #66515772990 Kenmore dishwasher

  • Frame And Console
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Control Panel will not unlock

A:

Hi Bob,

Thank you for submitting a question to Manage My Life.

If the control lock cannot be turned on and or off it is most likely a failure of the console. The tech sheet does not give any pin outs or checks for this issue.

CONTROL LOCK: The Control Lock light is turned on and all keys of the keyboard are disabled whenever the Control Lock feature is invoked by the customer. The Control Lock feature (and light) can be turned on or off by the customer at any time by holding down the Air Dry option key for 4 seconds.

The console is only available in black, part number 3384340. Here is a link that you may use to purchase the console for your Kenmore model number 665.15772990 dishwasher .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

I hope this is helpful, and if I may be of further assistance please include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
April 16, 2012
Q:

Kenmore Ultra Wash Dishwasher

A:

Hi Wayne,

Thank you for submitting a question to Manage My Life

I am sorry you are having problems with your dishwasher.

There is a service diagnostic cycle for this dishwasher (see the first image below). Running this service diagnostic cycle will not necessarily reset the control but it can help you identify any issues.

This dishwasher has a time fill and it is set to a 2 minute fill for all cycles. I have included the common cycle chart in the image below. From your description it sounds like you have a good water supply and pressure. Most likely you have a clogged fill valve or the valve may just need to be replaced.

Run the service diagnostic cycle and let me know what happens. If the fill in this cycle runs for 2 minutes and the water level is not just below the heating element bracket I recommend replacing the fill valve.

Here is a link that you may use to purchase the Fill Valve .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post. Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
May 24, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show