Model #6651560592 Kenmore dishwasher

  • Console
    3 Results
  • Heater, Pump/lower Sprayarm
    3 Results
  • Pump And Motor
    3 Results
  • Tub
    3 Results
  • Door And Toe Panel
    3 Results
  • Dishrack
    3 Results
  • Wiring Harness
    3 Results


Error Codes

Error Code:



Question and Answers


Our model # 6651560592 Kenmore dishwasher is not cleaning as well as it used to. Anything we can check?


Based on the age of your dishwasher there is a good chance that the dishwasher is not filling with enough hot water. Over time and use the water inlet valve filter screen can become restricted with debris causing a lack of water fill. The water level after filling should be touching the bottom of the water level float located in front right corner. If it's not getting enough water then the water inlet valve will likely need to be removed and replaced. NOTE: Disconnect the power supply and turn off the water supply to the dishwasher before removing the toe plate and replacing the water inlet valve.

Another thing to check for is restrictions in all the little holes in the spray arms. You will also need to check the lower spray arm nozzle cap (key#5) for any splits in the mold seam and also check for any loose screws securing the pump outlet to the pump.

I added a couple of images below, one with the common cleaning causes and fixes and one image showing pump parts and key numbers to reference.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
September 27, 2010